Better shock rocker

Was able to grab a decent rear shock rocker arm from ebay. Made by NWS.

The plan was to use an L1 which I have but was able to get this NWS one for a decent price and it's slightly lighter so will stick with this instead.

Will get a repaint before it goes in.

Had to order all new bearings and seals at a cost of about £100 from kwak direct. Crying a little inside about that one but it had to be done. Will be able to get the rolling chassis up properly soon and then it's just a case of transferring over the decent stuff from my L to the J rebuild. (Engine, loom, carbs etc)